Demutiplex

Demultiplexer or decoders are devices that have the function desired output selection is adjusted to a predetermined input. At the decoder if input as an example of three input a1, a2 and a3, then the output will be produced 2 ^ 3 = 8 output (b1, b2, b3, b4, b5, b6, b7 and B8).

In the picture below shows an example in the specification demultiplexer using TTL IC 74HC237

Share:

Read More

3 Bit to 8 Line Demultiplexer (Dekoder)

Demultiplexer or decoders are devices that have the function desired output selection is adjusted to a predetermined input. At the decoder if input as an example of three input a1, a2 and a3, then the output will be produced 2 ^ 3 = 8 output (b1, b2, b3, b4, b5, b6, b7 and B8).

In the picture below shows an example in the specification demultiplexer using TTL IC 74HC237

74HC237 demultiplexer Logic diagram

The 74HC237 is a 3-to-8 line demultiplexer with latches at the three address inputs The 74HC237 essentially combines the 3-to-8 decoder function with a 3-bit storage latch. When the latch is enabled (LE = LOW), the 74HC237 acts as a 3-to-8 active LOW decoder. When the latch enable (LE) goes from LOW-to-HIGH, the last data present at the inputs before this transition, is stored in the latches. Further address changes are ignored as long as LE remains HIGH.

The output enable input (E1 and E2) controls the state of the outputs independent of the address inputs or latch operation. All outputs are HIGH unless E1 is LOW and E2 is HIGH.

truth table IC 74HC237 demultiplexer

Pinning IC 74HC237

Quick reference data demultiplexer 74HC237

• supply voltage: 0.5 +7 V
• input diode current: ±20 mA
• output diode current: ±20 mA
• output source or sink current: ±25 mA
• storage temperature: 65 +150 °C
• power dissipation: 750 mW

Share:

Read More

Decoder 4 Bit to 16 Line

Decoder 4 bit to 16 line HCC4514B/HCC4515B are monolithic integrated circuits available in 24-lead dual in-line plastic or ceramic package and plastic micro package. The HCC/HCF4514B/4515B consisting of a 4-bit strobed latch and a 4 to 16 line decoder. The latches hold the last input data presented prior to the strobe transition from 1 to 0.Inhibit control allows all outputs to be placed at HCC/HCF4514B/4515B regardless of thestateofthedata or strobe inputs. The decode truth table indicates all combinations of data inputs and appropriate selected outputs.

 

Decoder 4 Bit to 16 Line HCC4514B/HCC4515B

Absolute maximum rating HCC4514B/HCC4515B decoder 4 bit to 16 line

• Supply Voltage: 0.5 to + 18 V
• Input Voltage: 0.5 to VDD + 0.5 V
• Total Power Dissipation (per package): 100 mW
• Operating Temperature : 40 to + 85 C
• Storage Temperature – 65 to + 150 C

Note:
Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections

decoder Logic diagram

truth table IC decoder HCC4514B/HCC4515B

Share:

Read More